DSM part-out. Best of the best stuff!

[Dizmm]

Lots of good parts here, best of the best!

--------------------------------------------------
brake setup:

Here are the details right from TCE:
HD Race Front 13.0 x 1.25 with FSL caliper
4piston Forged Superlite Caliper with stainless steel pistons
Steel tab mount brackets
Aluminum rotor hats
Directional Vane rotors
Gas slotted, Zinc plated
SS Brake lines
2-sets of the B compound Race Brake Pads
1-set of the BP10 "street/auto-x" pads

This is a complete BOLT-ON and go kit. This kit works AWESOME!!! There is no describing the braking power with this kit. This kit also works awesome with the stock rear brake setup, no need for adjustable poportion valves or bigger brakes in the rear.

Price is $950, that is nearly half the price that i paid for this kit bran new with all the stuff.

http://www.dsmsupport.com/images/andy/projectdv2/03-20-08_1414.jpg

http://www.dsmsupport.com/images/andy/projectdv2/03-20-08_1416.jpg

http://www.dsmsupport.com/images/andy/projectdv2/IMG_3912.jpg

http://www.dsmsupport.com/images/asm/dizmmv2/IMG_4010.jpg
---------------------------------------------------

Full Coil-over setup:

Koni Sport Shocks ($620 bran new)
GroundControl sleeves, perches, & coaxial hats
RRE pillowballs
HyperCoil Springs (650lb Front / 425lb Rear)
Free install and corner-weighting service (provided by ASM Corner-weighting, central wisconsin)

these have about 20k total miles on them. I also have extra parts such as some helper springs, extra spring perches, extra set of softer springs, hats, ect...

Also I might add this is the suspension setup that JTCinders (Jtoby, DSMtuners wiseman and suspension gooroo) has designed and setup. This is near the best of the best suspension you can get. This setup has won Jtoby many events and have done me VERY well taking FTD's at a few events and placing within the top 3 at every event attended this year.

Price...$1000 shipped.

more pics to come....
few pics of the car to get an idea of right height and such:
http://www.dsmsupport.com/images/asm/cw/5.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/IMG_5983.jpg
---------------------------------------------

Meth/Alky/H20 Injection setup
Dual M7 Nozzles tapped to the 2g TB Elbow
McCaster 250psi solenoid
Shurflo Silver Pump w/auto on/off pressure switch
pressure filled reservoir to reduce spikes/drops
(setup to use the windshield washer reservoir)

$200 for the entire kit, I'll even throw in 2 gallons of alky.

------------------------------------------------

RC 550cc Injectors (set of 4)......$165

------------------------------------------------

more to come, pics to come...

Also everything is still on the car, will be taking it off as its sold.

[chuckracer442]

Why the part out? new car, accident?

[Dizmm]

http://www.dsmsupport.com/images/asm/myevo/IMG_4208.jpg

http://www.dsmsupport.com/images/asm/myevo/IMG_4209.jpg

[ianb]

haha, nice! stock, mostly stock? any big plans?

[chuckracer442]

Now what is going to become of DSM support and all of andy's DSM rallying for support... is it now evo... does this mean your now in a fierce Subaru vs. Evo Rivalry.. I figured on at least a Subaru so that there could still be some car smack being said between you and thom.

[Hille]

Blue EVOs suck. Silver is the only cool EVO color.

[Dizmm]

Blue EVOs suck. Silver is the only cool EVO color.

whatever, silver is always 2nd place big boy!!!

[shaggy4267]

I'm interested in the parts you have.

How much for the suspension if I came to SP and picked it up?

[shaggy4267]

Couple more questions....

Do you have a DSMlink ECM? Logger? Just wondering how you were tuning it and if it's F/S?

Can you give me a list of performance parts you have and the price your asking.

Basically here's the deal...

I have a 97 AWD eclipse. I want to get it setup for the same thing you used your car for. Now that doesn't mean I can afford to buy every component you have, but Doesn't mean I can't try...

I'm about 2 hours away so I could do pick up on anything I buy.

[Dizmm]

The Suspension (Coil-over setup) has been sold.

The DSMlink will come with the ECU, so its a matter of plugging it in. easy as pie!!! Then for tuning you need a laptop, and i have the DSMlink software you install and from there you have access to tune fuel, timing, 2-step rev limiter, No lift to Shit, and a bunch more stuff. Check the DSMlink website for more info.

I can also help out with installation and tuning if you'd like.

I'd like $650 for DSMlink and the ECU for a plug'n play installation.

[shaggy4267]

PM'd

[shaggy4267]

What were you running for rims and tires??

[Dizmm]

What were you running for rims and tires??

i ran some toyo proxy RA1's which are already sold, and i also ran some advan A032 R-compounds which are now on my evo.

[shaggy4267]

Guess I'm alittle too late.

How bout an intake MAF to turbo? I just have the stock flex hose.

AFPR?
FMIC?

Send me some pics and prices..

[Dizmm]

Guess I'm alittle too late.

How bout an intake MAF to turbo? I just have the stock flex hose.

AFPR?
FMIC?

Send me some pics and prices..


I used the stock AFPR
FMIC setup is sold

As for the intake pipe setup, that was going to be ging with the car, but if you really want, i could trade you for your stock stuff plus a little cash. Otherwise i am sure they are cheap enough all over the internet.

[shaggy4267]

Did you sell the car?

I swap you when we do the ECU tranfer, sound good?

[Dizmm]

Did you sell the car?

I swap you when we do the ECU tranfer, sound good?

i still do have the car. let me know when you would like to come on over.

[shaggy4267]

Some time next week say Wednsday. You pick the time. I work weekends through this month so I'm free all week except Tuesday.
Thanks Chris

[Dizmm]

Some time next week say Wednsday. You pick the time. I work weekends through this month so I'm free all week except Tuesday.
Or call me 715-939-7850 Thanks Chris

later works better, say around 7ish.

[shaggy4267]

Pm me you address or directions

[Dizmm]

PM sent.

[shaggy4267]

Hey Dizmm,

I know it's been quite awhile since I talked to you last, I was wondering if you still have the DSM link? Or if you have any parts left from your old car..

I've been trying to get my car ready for USAIR this year.

[Dizmm]

sorry, link is sold along with almost all of my dsm stuff.